8−Stage Shift/Store Register with Three−State Outputs 3−State Outputs
Capable of Driving Two Low−Power TTL Loads or One Low−Power
Schottky TTL Load Over the Rated Temperature Range
Input Diode Protection
Data Latch
Dual Outputs for Data Out on Both Positive and
Negative Clock Transitions
Useful for Serial−to−Parallel Data Conversion
Pin−for−Pin Compatible with CD4094B
Pb−Free Packages are Available
30V P-Channel PowerTrench MOSFET 11 A, 30 V RDS(ON) = 13 mΩ @ VGS = 10 V
RDS(ON) = 19 mΩ @ VGS = 4.5 V
Low gate charge
Fast switching speed
High performance trench technology for extremely
low RDS(ON)
High power and current handling capability
300 928 MHz FSK Transceiver Frequency Agile With SPI Bus Interface - High Integration Minimizes System Cost
- Data Rates To 28.8 Kbits/Sec
- FSK Operation Capable Of Frequency Hopping
- Programmable Power, Frequency And Tx/Rx/Standby
- Operates From Single 2.8V To 3.3V Power Supply
- High Performance On-chip Baseband Filtering
- Digital Encoding, Decoding, And Correlator
- Surface Mount Leadless Plastic Packaging
- Direct Down Conversion (Zero IF) Receiver
NARROW BAND FM IF IC ●Low Operating Voltage (1.8 to 7.0V)
●Low Operating Current (20mA typ. @V+=2.4V)
●Maximum input frequency (100MHz)
●A ceramic discriminator is available
●Bipolar Technology
●Package Outline (SSOP20)
super low current FM IF IC ●Low Operating Voltage (V+=1.1 to 4.0V)
●Super low Operating Current (600μA，V+=1.4V)
●RSSI (Received Signal Strength Indicator)
●FSK wave shaper
●Battery check alarm function (Alarm Voltage=1.1V typ.)
●Battery saving function
●A high output current voltage regurator with an external transistor (Vreg=1.0V typ.)
●A ceramic discriminator is available.
●Bipolar Technology
●Package Outline (SSOP16)
FM IF demodulator IC with 450MHz IF input · Low Operating Current : FM2.5mA at V+=2V
AM4.0mA at V+=2V
· Low Operating Voltage : 1.8V to 9.0V
· Operating Frequency : Up to 100MHz(reference value)
· IF Input Frequency : 450kHz(standard)
· Bipolar Technology
· Package : SSOP20
455kHz INPUT FM IF DEMODULATOR ●Low Operating Voltage (1.6V to 5.5V)
●Low Operating Current (550uA at V+=1.8V)
●IF Input Frequency (455kHz (standard))
●RSSI Comparator
●The Range of Linear Area on RSSI Output versus IF Input Characteristics (NJN2590 IF Input level=25 to 60 dBuVEMF(reference value)
NJM2597 IF Input level=35 to 85 dBuVEMF(reference value))
●Bipolar Technology
●Package Outline (SSOP14)
